58 Chapter 1
Introduction to Programming X-Series Applications
STATus Subsystem (Remote Only Commands)
Questionable Frequency Positive Transition This command determines which bits in the
Questionable Frequency Condition register will set the corresponding bit in the
Questionable Frequency Event register when the condition register bit has a positive
transition (0 to 1). The variable <integer> is the sum of the decimal values of the bits that
you want to enable.
Questionable Integrity Register
Questionable Integrity Condition This query returns the decimal value of the sum of the
bits in the Questionable Integrity Condition register.
NOTE The data in this register is continuously updated and reflects the
current conditions.
Questionable Integrity Enable This command determines which bits in the Questionable
Integrity Condition Register will set bits in the Questionable Integrity Event register,
which also sets the Integrity Summary bit (bit 9) in the Questionable Register. The
Max 32767
SCPI Status Bits/OPC
Dependencies
Sequential command
Mode All
Remote Command :STATus:QUEStionable:FREQuency:PTRansition
<integer>
:STATus:QUEStionable:FREQuency:PTRansition?
Example STAT:QUES:FREQ:PTR 2 Frequency Reference âbecame
unlockedâ will be reported to the Frequency Summary of the
Status Questionable register.
Preset 32767
Min 0
Max 32767
SCPI Status Bits/OPC
Dependencies
Sequential command
Mode All
Remote Command :STATus:QUEStionable:INTegrity:CONDition?
Example STAT:QUES:INT:COND?
Preset 0
SCPI Status Bits/OPC
Dependencies
Sequential command
To Next Page
Loading...
