E8356-90001 2-9
Installing Your Analyzer
STEP 6. Perform Administrative Tasks
NOTE
This product contains the Windows XP operating system. The Network
Analyzer application is supported and qualified only with Windows XP. The
Windows Vista Certificate of Authenticy is valid and applies to the Windows
XP installation.
The first time you start the PNA, the Microsoft Windows license agreement is presented.
Click I Accept, then Next
.
STEP 6. Perform Administrative Tasks
We recommend that you consider performing the following administrative tasks shortly
after powering up the analyzer for the first time.
❏ Set up the administrator password
❏ Enter the computer name
❏ Set the time and date
NOTE
Do NOT create additional User Accounts until you have read the PNA Help
file topic: “PNA User Accounts and Passwords” which states why and
how this should be done.
Procedures for the above tasks are in the Help system in the analyzer. To view these
procedures:
• On the analyzer’s front panel, press the
Help button. Or, on the PNA display, click Help,
Network Analyzer Help.
• Click
Quick Start in PNA Help.
• Click
Perform Administrative Tasks.
• Click the task you wish to perform.
STEP 7. Run the Operator’s Check
The operator’s check should be performed when you first receive your analyzer, and any
time you wish to have confidence that the analyzer is working properly. The operator’s
check does not verify performance to specifications, but should give you a high degree of
confidence that the instrument is performing properly.
On the System menu, point to Service, and then click Operator’s Check. Follow the
prompts.
For assistance, use the
Help button displayed on the screen of the Operator’s Check.
To Next Page
Loading...
Need help?
General
