E8356-90001 4-1
4 Safety, Regulatory, and Environmental
Information
Maintenance
To remove dirt or dust from the external case of the network analyzer, clean the case using
a dry or slightly-dampened cloth only.
WARNING
To prevent electrical shock, disconnect analyzer from mains before
cleaning. Use a dry cloth or one slightly dampened with water to
clean the external case parts. Do not attempt to clean internally.
Shipment for Service
Contact Agilent Technologies for instructions on where to ship the analyzer for service.
Refer to “Contacting Agilent” on page 3-2.
Ship the analyzer using the original packaging materials. Shipping the analyzer in
anything other than the original packaging may result in non-warranted damage.
Safety Symbols
The following safety symbols are used throughout this manual. Familiarize yourself with
each of the symbols and its meaning before operating this instrument.
CAUTION
Caution denotes a hazard. It calls attention to a procedure that, if not
correctly performed or adhered to, would result in damage to or destruction of
the product. Do not proceed beyond a caution note until the indicated
conditions are fully understood and met.
WARNING
Warning denotes a hazard. It calls attention to a procedure which, if
not correctly performed or adhered to, could result in injury or loss
of life. Do not proceed beyond a warning note until the indicated
conditions are fully understood and met.
To Next Page
Loading...
Need help?
General
