4-4 E8356-90001
Safety, Regulatory, and Environmental Information
Regulatory Information
Regulatory Information
This section contains information that is required by various government regulatory
agencies.
Instructions for Use
This product has been designed and tested in accordance with accepted industry
standards, and has been supplied in a safe condition. The documentation contains
information and warnings that must be followed by the user to ensure safe operation and
to maintain the product in a safe condition.
Install the instrument so that the detachable power cord is readily identifiable and is
easily reached by the operator.
The detachable power cord is the instrument disconnecting device. It disconnects the
mains circuits from the mains supply before other parts of the instrument. The front
panel switch is only a standby switch and is not a LINE switch (disconnecting
device).
Alternatively, an externally installed switch or circuit breaker (which is readily
identifiable and is easily reached by the operator) may be used as a disconnecting device.
WARNING
The PNA display must remain in the 16 bit color setting in order to
comply with international emissions regulations.
To Next Page
Loading...
Need help?
General
