E8356-90001 iii
Assistance
Product maintenance agreements and other customer assistance agreements are available
for Agilent Technologies, Inc. products. For information about these agreements and for
other assistance, contact Agilent. Refer to “Contacting Agilent” on page 3-2.
Technology Licenses
The hardware and / or software described in this document are furnished under a license
and may be used or copied only in accordance with the terms of such license.
Trademarks
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows and MS
Windows are U.S. registered trademarks of Microsoft Corporation.
Safety Notes
The following safety notes are used throughout this manual. Familiarize yourself with
each of the notes and its meaning before operating this instrument. All pertinent safety
notes for using this product are located in Chapter 4 , “Safety, Regulatory, and
Environmental Information.”
WARNING
Warning denotes a hazard. It calls attention to a procedure which, if
not correctly performed or adhered to, could result in injury or loss
of life. Do not proceed beyond a warning note until the indicated
conditions are fully understood and met.
CAUTION
Caution denotes a hazard. It calls attention to a procedure that, if not
correctly performed or adhered to, could result in damage to or destruction of
the instrument. Do not proceed beyond a caution sign until the indicated
conditions are fully understood and met.
To Next Page
Loading...
Need help?
General
