Agilent Technologies U1242A - Reviewing Logged Data; Removing Logged Data

22 U1241A/U1242A User’s and Service Guide
2 Features and Functions
Figure 2-7 Interval logging display
Reviewing Logged Data
1 Press (View) for more than one second to enter Log View mode.
The last recorded entry and last logging index are displayed on the
secondary display.
2 Press to ascend or to descend through logged data. Press to
select the first record and press to select the last record for quick
navigation.
3 Press to switch between hand (manual) and interval (automatic)
logging review mode.
4 Press (View) for more than one second to exit Log View mode.
Removing Logged Data
Press (Log) for more than one second at the respective Log Review
mode (hand or interval) to clear all logged data in the memory.
NOTE
When interval (automatic) logging is enabled, all keypad operation is disabled, except for
LOG function.
NOTE
Maximum data that can be stored is 200 entries. When the 200 entries are filled, FUL
annunciator is indicated on the secondary display.