Agilent Technologies U1242A - Setting Configurations

26 U1241A/U1242A User’s and Service Guide
3 Default Setting Configurations
Setting Configurations
1 Turn meter OFF.
2 From OFF position, press and hold (SETUP) while turning the rotary
switch to any non- OFF position.
To change a menu item setting in Setup mode, perform the following steps:
1 Press or to scroll through menu items.
2 Press or to scroll through available settings. See Table 3- 9 for
the details of each available option.
3 Press (SAVE) to save the changes. These parameters remain in the
non- volatile memory.
4 Press and hold (SETUP) for more than one second to exit Setup
mode.
NOTE
After you hear a beep, the meter is in Setup mode and you can release button.