Agilent Technologies U1242B User Manual

34 U1241B/U1242B User’s and Service Guide
4 Service and Maintenance
When servicing, use the specified replacement parts only. The Table 4- 11
shows the replacement part numbers.
Table 4 -1 1 List of replacement part number
No beeper tone
• Check setup mode and verify if the beeper is set to OFF. Then select the
desired driving frequency.
Failed on current measurement
• Check the fuse.
Part number Description
2110-1400 Fast blow fuse 1000 V, 0.44 A (10 mm x 35 mm)
2110-1402 Fast blow fuse 1000 V, 11 A (10 mm x 35 mm)

Agilent Technologies U1242B Specifications

General

Brand	Agilent Technologies
Model	U1242B
Category	Multimeter
Language	English