xxviii Agilent U1602B/U1604B User’s and Service Guide
Figure 4-4. Continuity test shorted with audible beeper
sound. 102
Figure 4-5. Diode in forward bias condition 104
Figure 4-6. Diode in open condition 104
Figure 4-7. Capacitance measurement 105
Figure 4-8. Temperature measurement in degrees Celsius (°C)
together with degree Fahrenheit (°F) display. 107
Figure 4-9. Current measurement 109
Figure 4-10. Humidity measurement 110
Figure 4-11. Pressure measurement 111
Figure 4-12. Set the reading as reference value 112
Figure 4-13. Set the reading as measured value 113
Figure 4-14. Relative value obtained from the delta of the measured
and reference value. 113
Figure 4-15. Automatic measurement in resistance measurement
mode 114
Figure 4-16. Auto-range mode 116
Figure 4-17. Manual range mode 116
Figure 5-1. Maximum measurement is selected for DC voltage data
recording. The initial time base is 15 seconds — 150
seconds. 120
Figure 5-2. After exceeding 150 seconds, the graph automatically
compresses to half screen and the time base changes to
30 seconds — 300 seconds. 120
Figure 5-3. Enabling the CSV saving function 121
Figure 5-4. Setting the interval 122
Figure 7-1. Test connection from calibrator to instrument and digital
multimeter 137
Figure 7-2. Test connections from calibrator to instrument 144
Figure 7-3. Self-calibration dialog box 151
Figure 8-1. Push towards the arrow direction to remove the
stand 159
Figure 8-2. Disassemble the stand from the instrument 159
Figure 8-3. Remove battery cover screw 160
To Next Page
Loading...
Need help?
General
