Instructions for Use
Preparation for installation
TwisTorr 74 FS User Manual / 87-901-053-01 269/342
Preparation for installation
The TwisTorr 74 FS pump is supplied in a special protective pack-
ing. If this shows signs of damage which may have occurred during
transport, contact your local sales office.
When unpacking the pump, be sure not to drop it and avoid any kind
of sudden impact or shock vibration to the TwisTorr 74 FS pump.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100% recyclable and complies with EEC Directive
94/62 and subsequent amendments.
CAUTION!
In order to prevent outgassing problems, do not use bare hands to handle
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
NOTE
Normal exposure to the environment cannot damage the TwisTorr 74 FS .
Nevertheless, it is advisable to keep it closed until it is installed in the system,
thus preventing any form of pollution by dust.
To Next Page
Loading...
Need help?
General
