Agria 6000 - Starting the Engine

24 Power Hoe 6000 Edition 11.98
4. Commissioning and Operation
1/4
Starting the Engine
l Open fuel tap (B/21)
Engine cold:
l Press tickler (B/23) on carburetor until
fuel overflows.
l Set speed control lever (C/7) to “max”
(full throttle).
Engine warm:
l Do not actuate tickler on carburetor.
l Set speed control lever (C/7) to
approx. 1/4 throttle.
l Move engine-off-switch (C/3) to oper-
ating position “I”.
l Pull hand clutch lever (C/5) and lock
with pawl (C/6) (start position).
l Pull starting-rope on handle (B/29)
until you feel starter clutch engage. Then
pull hard and fast to start the engine.
After the start, let rope glide back. Do not
let snap.
l Once the engine has started, slowly
move speed control lever to centre posi-
tion and let engine warm up for some
time.