Agria 6000 - Manual Gearbox

Edition 11.98 Power Hoe 6000 29
5. Maintenance
3 Drain plug
4 O-ring
Manual Gearbox
Check the transmission oil level in the
gearbox before you start up the machine
and repeat checks at intervals of 25
operating hours.
l Park the machine on level ground (see
illustration).
The oil level is visible in the opening
(B/28) after the Allen head screw has
been removed. Top up transmission oil, if
necessary.
Change transmission oil after the first
25 operating hours and then at intervals
of 50 operating hours. Ensure oil filler plug
(B/28), drain plug and the surrounding
parts are absolutely clean to prevent any
ingress of dirt.
For oil filling quantity and quality, see
”Specifications”.
Chain Drive
The chain drive is filled with transmission
oil.
Refilling is not necessary as long as no
lubricant leaks are spotted on the
housings and their seals.
Checking Lubricants
l Open the cover of the housing (A/21).
l Crank the hoeing shaft at least 6 rota-
tions. Lubrication is fine, if the chains are
wet with transmission oil (visual check).
Top up transmission oil, if necessary.
Chain Tension
The wheel drive chain should neither be
tight nor too slack.
l Undo the 3 attachment bolts (1) and
the locking nut (3).
l Set the chain tension via the hex head
bolt (2).
l Retighten locking nut (3) and attach-
ment nuts (1).
1 Plug
2 O-ring
Oil level