Edition 11.98 Power Hoe 6000 25
4. Commissioning and Operation
6
30 sec
Switching off Engine
l
Move speed control lever to idling gas
position and let engine run idle for
approx.1/2 minute.
l
Move engine-off-switch to position “0”.
l
Close fuel tap.
I
Note: The engine-off-switch
(C/3) also serves as emer-
gency off-switch. If necessary,
bring switch into position “0” to turn en-
gine off.
I
For longer periods of no opera-
tion, do not switch off engine
with engine-off-switch, but close
fuel tap and let engine run until it slowly
comes to a complete stop due to lack of
fuel. This ensures that carburetor is empty
and no resin residue can deposit.
W
Secure power hoe against
unauthorized use – discon-
nect spark-plug connector.
To Next Page
Loading...
