Aim MYCHRON4 660 - Configuration Functions; Configuration Wizard

MyChron4 660
User Manual
Release 1.03
www.aim-sportline.com
16
2.3 – Configuration functions
Before starting your system on-track, please configure your gauge in order
to acquire correct data from your system.
2.3.1 – Configuration wizard
You can enter the Configuration Menu pressing the MENU button.
The Wizard automatically switches on every time you enter the configuration
menu, until it ‘s fully completed at least once.
Following the Wizard steps, you need to configure:
•
Temperature Unit ( Fahrenheit or Celsius)
•
Maximum RPM (Bar Graph Maximum RPM)
•
RPM Tattle ( 0 = disabled)
•
Wheel Circumfrence (inch)
• Drivegear
• Drivengear
Adjust Hour
Adjust Minute
Adjust Year
Adjust Month
Adjust Day of Week
The points listed here above are quite intuitive and do not need further
explanations;