MyChron4 660
User Manual
Release 1.03
www.aim-sportline.com
60
4.4.2 – Analysis View
Once a run has been loaded, the “Analysis View” window will be prompted as
shown in the screenshot below. There are up to 8 Analysis Views available. Any
of them is customizable independently from the others, hence enabling you to
have different analysis templates always available. The default name for each
view is “Time View,” which can be changed through the plot settings command as
will be explained later.
Again, the view has a toolbar, a left part and a right part, showing new
information, both the left and the right part are divided in sub windows as
described below.
The left part of the toolbar is the same already described. Available commands in
this view are:
Channels – to modify run channels properties.
Settings – to modify plot settings properties.
Plot type – to choose which kind of plot you want to display.
Zoom In – to move the analysis to a shorter time window.
Zoom Out – to move the analysis to a longer time window.
Displacement – to change channels displacement on the plot.
Prediction – to plot, when available, an ET prediction, useful for bracket racing.
To Next Page
Loading...