Menu bar
103
Menu bar
5. Link
5.1. Line Supervision
Monitor the stations in the system for any failure.
Click "Link" > "Line Supervision," the "Line Supervision" window will be shown.
When there is an error, the following window will be shown.
Even if the error is restored or a new error occurs, the window will not be automatically refreshed.
To refresh, click "Link" > "Line Supervision" again to re-display the window.
The station information for a current error will be shown.
The content of the communication error will be shown.
A communication error occurs when the station in "Source Station Information"
calls the station in "Destination Information."
To Next Page
Loading...