System settings (Settings (Table View))
194
8.6. Master Station Display Settings (Master Station
only)
Configure the settings for Master Station display.
Brightness
Time Format
Standby LED State
Description Set the brightness of the monitor.
Settings 1 (Dark) - 10 (Bright)
Default values 6
Description Select the time format for the display on the station.
Settings • mm/dd/yyyy (12h)
• mm/dd/yyyy (24h)
• dd/mm/yyyy (12h)
• dd/mm/yyyy (24h)
• yyyy/mm/dd (12h)
• yyyy/mm/dd (24h)
Default values mm/dd/yyyy (12h)
Description Set to keep the Status indicator on while the station is in standby.
Settings •ON
•OFF
Default values ON