System Settings (Settings (Station View))
245
5.5. All Page
When paging all stations, the default setting is multicast. When paging the stations in unicast is
required, configure the following settings.
Unicast can transmit up to 50 stations.
When paging stations in multicast, configure "2.4. Multicast Address" ➤ P.210.
How to configure
1) Identify the station to be configured from "Station list."
2) Check of "Unicast."
• Checked : Unicast transmission
• Unchecked : Multicast transmission
3) When done, click .
4) Click .