System settings (Settings (Table View))
146
3.4. Custom Sound Registry
Register the audio files to be used for a ringtone.
For each station, up to 100 files can be registered (total length of within approximately
200 seconds).
Supported file format
File format: .wav
Audio sample size: 16 bits
Audio sample rate: 8 kHz
Number of channels: One (monaural)
How to register an audio file
1) Click at the end of the row for the station for which the file is to be registered.
2) Select the audio file to register, and click .
3) The file name of the selected file will be shown in "Sound Name."
The name of the sound will be shown when configuring a ringtone.
4) When done, click .
5) Click .
When using a file for ringback tone, ringtone, or network camera event tone, add a period of
silence in the .wav file if the tone is to be intermittent.
To delete a registered audio file, check the file and click and upload setting file to
station.
A DVD-ROM with sample files is included in the package of the Master Station.
To Next Page
Loading...