Stations with different audio CODEC cannot call, monitor, or page each other.
Audio RTP Transmission Interval [msec] ♠
RTP Idle Detection Time [sec] ♦♠
Description Select the audio CODEC.
Settings • G.711 (μ-law)
• G.711 (A-law)
Default values G.711 (μ-law)
Description Select the transmission interval of RTP audio.
Settings 20, 40, 60, 80, 100 msec
Default values 20 msec
Description Set the detection time of the idle state of RTP audio.
If RTP audio is not received within the specified time during a call or while monitoring or
paging, it will be disconnected.
Settings 10-180 sec (by 1 sec)
Default values 10 sec
To Next Page
Loading...