System Settings (Settings (Station View))
210
2.3.2. Miscellaneous
Call health check timer [sec] ♦♠
2.4. Multicast Address
Set when configuring to use multicast in "3.3. Group (Master Station only)" ➤ P.229, "5.5. All
Page" ➤ P.245 (for Master Station), or "5.2.1. Call Button Assignment" ➤ P.239 (for Video Door
Station).
For Master Station
For Video Door Station
For Paging (for Master Station), for Call (for Video Door Station)
Description When a communication error occurs during a call or while monitoring, the connection is
disconnected after the specified time elapses.
Settings • Do not transmit re-INVITE: A communication error should not be detected.
• 80-3600 sec (by 1 sec)
Default values 80-3600 sec, 90 sec
Description Set the multicast address for all page, group page (for Master Station), or group call (for
Video Door Station) through multicast.
Set a unique multicast address for each station.
Settings [IPv4]: 224.0.0.0-239.255.255.255
[IPv6]: FF10::0-FF1F:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
Default values -
To Next Page
Loading...