System settings (Settings (Table View))
173
6.3. Paging Settings
Configure the settings for paging.
6.3.1. Paging Pretone Setting
Pretone
6.3.2. Paging Time Setting (Master Station only)
Paging Timeout [sec] ♦
6.3.3. Paging Output Setting (Door Station only)
Paging Audio Output (same as Contact / Audio Output Settings)
Description Enable/disable the pretone function when the station is paged.
Settings •ON
•OFF
Default values ON
Description Set maximum time for a page.
Settings 10-600 sec (by 1 sec)
Default values 30 sec
Description Set how audio is to be delivered.
The entry is identical to "Audio Output" ➤ P.149 and "Paging Audio Output (same
as Contact / Audio Output Settings)" ➤ P.174. When the setting is changed, "Audio
Output" ➤ P.149 and "Paging Audio Output (same as Contact / Audio Output
Settings)" ➤ P.174 will be changed as well.
Settings • Built-in Speaker for communication and paging
• Audio Output for communication and paging
• Built-in Speaker for communication, Audio Output for paging
Default values Built-in Speaker for communication and paging
To Next Page
Loading...