System settings (Settings (Table View))
121
2.3. SIP
2.3.1. Connection
SIP Signaling Port ♦
2.3.2. Miscellaneous
Call health check timer [sec] ♦
Description Set the port for SIP communication.
Set the same port number for the stations which communicate with each other.
Settings 1-65535
Default values 5060
Description When a communication error occurs during a call or while monitoring, the connection is
disconnected after the specified time elapses.
Settings • Do not transmit re-INVITE: A communication error should not be detected.
• 80-3600 sec (by 1 sec)
Default values 80-3600 sec, 90 sec
To Next Page
Loading...