Aiphone IX-DF - 2.8. NTP Settings

System settings (Settings (Table View))
134
2.8. NTP
Configure the settings for NTP. When using NTP, set "Enable NTP" ➤ P.113.
2.8.1. Primary Server
 Address [IPv4]
 Address [IPv6]
 Port
Description Set the IPv4 address of the primary NTP server.
When using a "Hostname," set up "2.2. DNS" ➤ P.120.
Settings 1.0.0.0-223.255.255.255 or Hostname (1-64 alphanumeric characters)
Default values -
Description Set the IPv6 address of the primary NTP server.
When using a "Hostname," set up "2.2. DNS" ➤ P.120.
Settings ::FF:0-FEFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or Hostname (1-64
alphanumeric characters)
Default values -
Description Set the communication port for the NTP server.
Settings 1-65535
Default values 123