Startup and Configuration
63
4.2. How to configure
1) Click the title to be configured.
The Settings window for that particular title will be shown.
2) Configure each entry in this window.
• The selected field will turn orange. (Settings (Table View) only)
• When changing the settings, the field will turn pink. (Settings (Table View) only)
• Some titles allow copy and paste.
3)
When done with the window, click to save the settings.
To cancel the settings, click another title in the Setting menu.
• If there is an error when clicking , the error message will be shown and the
settings will not be allowed to be saved.
The field will be shown in red if there is an error. (Settings (Table View) only)
• If another title is selected without clicking , the system will prompt to save the
settings. Click to save the settings; click to continue without saving.
• When clicking , the screen goes back to the previous one.
4) Repeat steps 1 through 3 for other titles.
• To log out of IX Support Tool, click .
To Next Page
Loading...