Aiphone IX-DF - Flowcharts for Configuring the System

Introduction
15
Introduction
6. Flowcharts for configuring the system
When configuring the system using IX Support Tool, follow the flowchart that fits the application.
Save the settings after configuring the system. Otherwise, it may become impossible to restore
the settings after maintenance or after-sales servicing.
Flowcharts are for configuration using IX Support Tool.
To configure a station through a Web browser, refer to Web Setting Manual for each station.
For Static
IPv4 Address
• Create new data ➤ P.16
• Change the settings ➤ P.17
• Add a station ➤ P.19
• Delete a station ➤ P.20
• Replace a station ➤ P.21
For IPv4 Address
with DHCP
• Create new data ➤ P.22
• Change the settings ➤ P.23
• Add a station ➤ P.25
• Delete a station ➤ P.26
• Replace a station ➤ P.27
For Static
IPv6 Address
• Create new data ➤ P.28
• Change the settings ➤ P.30
• Add a station ➤ P.32
• Delete a station ➤ P.33
• Replace a station ➤ P.34
For stateless
IPv6 Address
• Create new data ➤ P.35
• Change the settings ➤ P.37
• Add a station ➤ P.39
• Delete a station ➤ P.41
• Replace a station ➤ P.42
For IPv6 Address
with DHCP
• Create new data ➤ P.44
• Change the settings ➤ P.46
• Add a station ➤ P.48
• Delete a station ➤ P.50
• Replace a station ➤ P.51