Aiphone IX-DF - Page 130

System settings (Settings (Table View))
130
 Audio 1 RTP Start Port ♦
 Audio 1 RTP End Port ♦
 Audio 2 RTP Start Port ♦
 Audio 2 RTP End Port ♦
Description Set the start port for the Audio 1 RTP communication range.
The (RTP End Port) should be greater than 210 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
Settings 1-65534
Default values 20000
Description Set the end port for the Audio 1 RTP communication range.
The (RTP End Port) should be greater than 210 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
Settings 1-65535
Default values 21000
Description Set the start port for the Audio 2 RTP communication range.
The (RTP End Port) should be greater than 10 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
Settings 1-65534
Default values 22000
Description Set the end port for the Audio 2 RTP communication range.
The (RTP End Port) should be greater than 10 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
Settings 1-65535
Default values 23000