Aiphone IX-DF - Page 161

System settings (Settings (Table View))
161
6.1.4. Door Release Output Assignment
Configure the connected station and the Authentication Key to release the door during a call.
 Contact Assignment
 Authentication Key
Point
 "Authentication Key" will be displayed as "****" on the screen.
 If "New System" is chosen from "Login and registration of the station," the settings for
"Authentication Key" will generate a random string of four letters and assign this when
"Automatically configure door release for all stations?" is enabled.
Description Set which door is to be released for an outgoing or incoming call or during monitoring
for each station.
Settings • Originating Station: Door connected to the originating station is released.
• Destination Station: Door connected to the destination station is released.
Default values Destination Station
Description
When "Destination Station" is chosen in "
Contact Assignment," set the authentication
key to be used when releasing the door.
This should match the authentication key of the destination station.
Settings 1-4 digits
Default values -
Destination Station:
Serial Number, Station Number, Station Name