System settings (Settings (Table View))
177
How to configure Network Camera Event Setup
1)
In "Master Station List," check the station in which network camera event will be registered.
2) In "Network Camera List," check the network camera which will be monitored for any
event.
• The network cameras registered in "
Network Camera Registry"
➤ P.138
will be shown.
3) Click .
(Obtaining the events may take several minutes.)
• Once events are successfully obtained, they will be shown in "Event List."
4) Check the events shown in the "Event List."
5) Click .
• The network cameras and events registered in event registry will be shown.
To Next Page
Loading...