Save the settings after configuring the system.
Refer to "Where the setting file is saved" ➤ P.82.
If the setting file is lost, station settings will need to be reconfigured.
1. Set "Language."
"3. Language" ➤ P.95
2. Retrieve the setting data for all the stations.
"1.4. Download Settings From Station" ➤ P.83
3. Delete the data of the station to be deleted.
"1.1.1. Remove Station" ➤ P.110
If a page is placed without deleting the station from the system, the operation may be delayed.
4. Upload the setting data to all the stations.
"1.5. Upload Settings To Station" ➤ P.85
5. Done.