"Authentication Key" will be displayed as "****" on the screen.
If "New System" is chosen from "Login and registration of the station," the settings for
"Authentication Key" will generate a random string of four letters and assign this when
"Automatically configure door release for all stations?" is enabled.
Description Set which door is to be released when a user tries to release a door for an outgoing or
incoming call or during monitoring.
Settings • Originating Station: Door connected to the originating station is released.
• Destination Station: Door connected to this is released.
Default values Destination Station
Description
When "Destination Station" is chosen in "
Contact Assignment," set the authentication
key to be used when releasing the door.
This should match the authentication key of the destination station.
Settings 1-4 digits
Default values ****
To Next Page
Loading...