System Settings (Settings (Station View))
260
Event
Network Camera Event Tone ♠
Event Tone Count [time(s)] ♠
Description Select the content of the event for the network cameras.
This is enabled when a network camera is registered in"3.2.2. Network Camera
List" ➤ P.224 and the event information can be obtained from it. The Event is
automatically obtained when a camera is registered in the network camera list.
For details of the Event, refer to the manual of the network camera.
Settings -
Default values -
Description Select the event tone for the network cameras.
Settings • Call pattern 1
• Call pattern 2
• Call pattern 3
• Call pattern 4
• Call pattern 5
• Call pattern 6
•Tremolo sound
• Busy tone
• On-hold tone
• Operation sound
• Error sound
• Sound registered in "3.4. Custom Sound Registry" ➤ P.234
Default values Call pattern 3
Description Set the Event Tone Count for the network cameras.
Settings • Infinite: Ringing continues until the event is terminated.
• 1-20 times
Default values 1
To Next Page
Loading...