12 1800223 E
CHAPTER 3
Unpacking the Generator
Unpacking the Generator
Carefully unpack and remove the 6D Generator and
all accessories from its shipping container. If the unit
or any accessory has been damaged in transit, notify
the shipper immediately.
The 6D Generator will consist of the base generator
unit (see Table 1) and any additional accessories
shown on the packing list.
Table 1 Packaged Items for the 6D Generator
1 6D Unit 0200475 for 115V
0200476 for 230V
1 Power Cord 6700001 for 115V
6700133 for 230V
1 Operating Manual 1800223
1 Output Elbow 5100935
1 Output Flange 1000725
After unpacking, if anything is missing or appears to
be damaged, contact ATI Customer Service at (410)
363-9696 or email at Info@atitest.com.
Caution
Do not lift the 6D unit using the sanitary flange or cord
wrap bracket. Damage to the unit may occur.
Note
ATI recommends that you save all packing materials for
future use, such as shipping the unit back for annual service.
In addition, the 6D's top foam packaging insert has been
designed for use in stacking generators up to three units
high.
To Next Page
Loading...