Aircel AHLD E-Series - Page 34

AHLD Series | Heatless Regenerative Desiccant Air Dryer
34
APPENDIX
Desiccant Material Safety Data Sheet
Advice on system design:
Provide local exhaust ventilation to control dust
.
Provide local exhaust ventilation to maintain recommended
P.E.L
.
Personal protective equipment
Respiratory protection:
Wear a NIOSH-certified (or equivalent) particulate respirator . Observe OSHA regulations for respirator use (29
CFR 1910.134)
.
Wear appropriate certified respirator when exposure limits may be exceeded
.
Hand protection:
Wear chemical resistant protective gloves., Consult with glove manufacturer for testing data
.
Eye protection:
Safety glasses with side-shields
.
Body protection:
Body protection must be chosen based on level of activity and exposure
.
9 .
Physical and chemical properties
Safety data sheet
F200
Revision date : 2008/12/04
Version: 3.0
Page: 3/5
(30286124/MDS_GEN_US/EN)
Form:
Odour:
Colour:
pH value:
Melting point:
Boiling point:
Vapour pressure:
Density:
Bulk density:
Partitioning coefficient
n-octanol/water (log Pow):
Viscosity, dynamic:
Solubility in water:
10 . Stability and reactivity
powder, granules, pellets, balls
odourless
off-white
9.4 - 10.1
2,050 °C
No data available .
No data available .
No data available .
approx
. 650 kg/m3
38.0 - 52 lb/ft3
( 68 °F)
No data available
.
No data available .
insoluble
Substances to avoid:
water
Hazardous reactions:
The product is chemically stable
.
Addition of water leads to increase in temperature
.
11 . Toxicological information
Oral:
Information on: Aluminum oxide
LD50/rat: > 5,000 mg/kg (OECD Guideline 401)
----------------------------------