Airsight XX52A - Software Operation; 2.9 For Administrator

24
Mode, Bright, Contrast Settings

Figure 4.4
Mode: This mode is optional, 50HZ/60HZ for the users who use 50HZ/60HZ frequency, outdoor for users who
want to use the camera to monitor an outdoor environment.
Bright: Set the parameters to adjust the image quality of the video. Click
to adjust the value.
Contrast: Set the parameters to adjust the image quality of the video. Click
to adjust the value.
Default all: Click it to set all the parameters back to the factory setting.
NOTE: If you login to the camera, and there is no video displayed, or the parameter of bright/contrast is blank,
you can try to click “default all” to set the parameters back to the factory setting to get live video.
NOTE: In Oper
ator mode, if you click other menus that are not available in Operator mode, the login interface
will pop up (Figure 2.6), input the user name / password at least 3 times to login again.
2.9 For Administrator
For details see Settings as Administrator (3.1 - 3.20).