Akai MPD32 User Manual

22
BUTTON MODE
GATE FIELD
SWING FIELD
NOTE REPEAT BUTTON MODE
The following screen will appear if you select “TOGGL-MOTRY” on Page 1. In this field, you can select whether the
[NOTE REPEAT] button will behave in a momentary (MTY) fashion, where pressing the button turns on the Note
Repeat function and releasing it turns it off, or in a toggle (TGL) manner, where pressing the button turns on the Note
Repeat function and pressing again turns it off.
1. While in Button Mode field, use [VALUE] dial to select Button Mode (Toggle
or Momentary).
2. Press [ENTER] to accept change.
NOTE REPEAT PARAMETERS – GATE, SWING
The following parameters can be adjusted if you select “GATE SWING” on Page 1.
GATE
Select the Note Repeat Gate in this field.
1. While in Gate field, use [VALUE] dial to select Gate duration.
2. Use the [>] button to select the next field.
SWING
Select the Note Repeat Swing in this field.
1. Use the [>] button to select the Swingfield
2. While in Swing field, use [VALUE] dial to select the desired Swing value.
3. Press [ENTER] to accept changes.

Akai MPD32 Specifications

General

Mixer section	-
Product color	Black
Drum pads backlight	Yes
Number of drum pads	16
Display type	LCD
USB connector type	USB Type-B
Power supply type	USB

Weight and Dimensions

Depth	384 mm
Width	308 mm
Height	64 mm