33
FREQUENTLY ASKED QUESTIONS
Question: Does the Note Repeat feature on the MPD32 work similarly to Note Repeat on the Akai MPC series?
Answer: Yes, the MPD32 features the same Note Repeat algorithm as can be found on the legendary Akai MPC
series. This feature allows you to perform and program rhythm patterns that would otherwise be nearly
impossible to do by hand.
Question: Does the MPD32 have internal sounds?
Answer: No. The MPD32 is a MIDI-controller, which means that it does not contain any sounds inside but is
instead used to control external sound devices, such as hardware and software synthesizers,
sequencers and drum machines.
Question: Can the MPD32 be synced to external devices?
Answer: Yes, the MPD32 can receive MIDI Clock through the USB and MIDI IN connection. This means that you
can synchronize tempo-based features, such as Note Repeat, to an external source. To synchronize the
MPD32 to an external MIDI Clock source, enter Global Mode, scroll to MIDI Clock and select “External”.
Question: Do I need to use a power adapter if I am using the MPD32 with a computer?
Answer: No. The MPD32 will draw power directly from the USB port. However, if your USB port does not supply
enough power or if you are using a USB hub, it may be necessary to use a power adapter.
Question: What software applications is the MPD32 compatible with?
Answer: The MPD32 is compatible with any software or hardware device which supports the MIDI protocol.
Please consult your specific hardware or software device’s documentation for instructions on enabling
the MPD32 as a MIDI input device.
Question: Can I use the MPD32 as a MIDI interface for other MIDI devices?
Answer: Yes. The MPD32 functions as a MIDI interface which can send and receive from other MIDI devices
connected to it.
Question: Can I control multiple devices with the MPD32?
Answer: Yes. The MPD32 can transmit information on 16 MIDI channels on 2 ports for a total of 32 different MIDI
Channels.
Question: How many different Presets can the MPD32 hold?
Answer: The MPD32 can store up to 30 Presets of controller configurations and settings for use with various
software and hardware modules. Presets can easily be copied, edited and stored for quick recall of
desired configurations.
Question: Can I send Program Change messages to my software or hardware devices?
Answer: Yes. You can send program change messages in Program Change mode. In addition, pads and buttons
may also be assigned to transmit program change messages.
Question: Are the pads on the MPD32 velocity and pressure sensitive?
Answer: Yes. The MPD32 sports real MPC velocity and pressure sensitive pads. This allows you to be extremely
expressive with your programming and performance.
Question: What type of pads is used on the MPD32?
Answer: The MPD32 features the same pads as the MPC2500.
Question: Are the knobs on the MPD32 endless?
Answer: The knobs on the MPD32 are endless pots. This allows you to limit the range of the knobs, as well as
use them as increment/decrement controls. Please note that your software application must be able to
receive and recognize NRPNs for Increment/decrement functions to work.
Question: I see 8 knobs, 8 faders, 8 buttons, and 16 pads. Is that all I get?
Answer: No. The MPD32 features multiple banks of controllers and pads, which can be accessed with the [PAD
BANK] and [CONTROL BANK] buttons. This allows you to access significantly more parameters than
the amount of physical controllers. There are 3 control banks, which effectively give you 72 (3x24)
controllers. There are also 4 different pad banks which give you a total of 64 (4x16) pads.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
