Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Note:
The general configuration file for the in-batch provisioning is with
the format “cfg” taking R29 as an example “r000000000029.cfg
( 10 “zeros” in total while the MAC-based configuration file for the
specific device provisioning is with the format ”MAC_Address of
the device.cfg, for example “0C110504AE5B.cfg.”
19.5.Static Provisioning Configuration
You can manually set up a specific server URL for downloading the firmware
or configuration file on device web Upgrade > Advanced > Automatic Autop
interface. If an autop schedule is set up, the indoor monitor will perform the
auto provisioning on a specific timing according to autop schedule you set
up. In addition,TFTP, FTP, HTTP, and HTTPS are the protocols that can be
used for upgrading the device firmware and configuration.
To Next Page
Loading...