Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
11.2.SIP Call &SIP Call Configuration
You can make SIP call ( Session Initiation Protocol ) in the same way as you
do for making the IP calls on the device. However, SIP call parameters related
to its account, server, and transport type need to configured first before you
can make calls on the device.
11.3.SIP Account Registration
Akuvox IT83/IT82/C317/C315 series indoor monitors support two SIP
accounts that can all be registered according to your applications. For
example, you can switch between the two SIP accounts. The SIP account can
be configured on the device and on the device interface. To configure the SIP
account on the device Advance Settings > Account screen.
The parameter settings for SIP account registration can be configured on the
Account setting screen and they can also be configured on the device web
interface. To perform the SIP account setting on the Web Account > Basic >
SIP Account Interface.
To Next Page
Loading...