EasyManua.ls Logo

Akuvox IT83 Series - Live Stream Setting; Intercom Call Configuration

Akuvox IT83 Series
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
57
11.9.3. Live Stream Setting
Receive Live Stream on the indoor monitor allows you to see the the video
image (one way video stream) from the calling device such as a door phone
whether or not you answered the call in audio or video mode, while the video
image from your indoor monitor will not be sent to the calling devices in
order to protect your privacy. To do the configuration on web Phone > Call
Feature >Audio Call Settings interface.
When the feature is enabled, once a caller require a video call:
Receive the incoming calls in video call mode so that both side can see
each while talking in the two-way video conversation.
Receive the incoming calls in audio call so that you can see the caller in
the one-way video conversation while the call can not see you.
Note:
Only device with camera module will have this feature.
11.10. Intercom Call Configuration
If you want to see the image at the door station before answering the
incoming call, you can enable the intercom preview function on web Phone >
Call Feature > Intercom interface.

Table of Contents