Akuvox IT83 Series - Call Setting; Call Auto-Answer Configuration

Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
54
Parameter Set-up:
 UDP:select “UDP” for unreliable but very efficient transport layer protocol.
UDP is the default transport protocol.
 TCP: select “TCP” for Reliable but less-efficient transport layer protocol.
 TLS: select “TLS” for Secured and Reliable transport layer protocol.
 DNS-SRV: select “DNS-SRV” to obtain DNS record for specifying the
location of services. And SRV not only records the server address but
also the server port. Moreover, SRV can also be used to configure the
priority and the weight of the server address.
11.9.Call Setting
IT83/IT82/C317/C315 will auto answer all incoming calls if call auto-answer
is enabled and receive live stream if live stream is enabled.
11.9.1. Call Auto-answer Configuration
IT83/IT82/C317/C315 will auto answer all incoming calls if call auto-answer
is enabled and receive live stream if live stream is enabled. To enable or
disable on web Account > Advanced > Call > Auto Answer interface. And set
up the corresponding auto answer parameters on web Phone > Call Feature >
Others interface.