Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
11.14. RF Setting (Optional)
IT83A/IT82A/C317A/C315A supports RF(Radio Frequency) module to
connect a pendent to trigger some actions, like unlocking or making a
emergency call. After pairing pendents and indoor monitors, then setup
different RF actions on device Advance Settings > RF Settings. After power
on the pendent, click Learning and press pendent one time, they will be
paired. The green indicator means pairing successfully.
Parameters Set-up:
Short Press When Idle: if you choose Assistance Call for short pressing
which means when you pressing the pendent about 1s, the indoor
monitor will make the pre-configured emergency call. No Action is
default.
Long Press: if you choose Unlock1/2/3 for long pressing which means
when you pressing the pendent about 3s, it will send out a unlocking
signal to the door phone during a call.
To Next Page
Loading...