Akuvox IT83 Series - Security; Monitor and Image; Monitor Setting

Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
71
14. Security
14.1.Monitor and Image
14.1.1. Monitor Setting
You can configure the monitor setting on the web Phone > Monitor interface.
Enter IP/SIP number of door phone in Device number and fill in device name.
Then set up the RTSP address. The RTSP format of the Akuvox door phone is
rtsp://deviceIP/live/ch00_0. you can enable or disable display in the call. If
enabled, when there is an incoming call from the monitor, the video will be
displayed.