Akuvox IT83 Series - Door Access Control Configuration; Relay Switch Setting; Local Relay Setting

Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
90
15. Door Access Control Configuration
15.1.Relay Switch Setting
15.1.1. Local Relay Setting
Local relays in Akuvox indoor monitor can be used to trigger relay for the
door access and trigger Chime bell as needed in different scenarios. You can
do this configuration on web Phone > Relay > Relay Setting > Local Relay
interface.
Parameter set-up:
 Relay Delay: set the relay delay time after the relay is triggered.
 Relay Type: set relay action type. There are two types of relay, chime bell
and open door. Chime Bell, when there is a call, the chime bell will ring.
Open door, when press the unlock icon, the local relay will be opened.