Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
LAN DNS1/2 Server: set up DNS (Domain Name Server) according to your
actual network environment. Preferred DNS Server is the primary DNS
server address while the Alternate DNS Server is the secondary server
address and the door phone connects to the alternate DNS server when
the preferred DNS server is unavailable.
10.2.Device Deployment in Network
Akuvox IT83/IT82/C317/C315 series indoor monitors should be deployed
before they can be properly configured in the network environment in terms
of their location, operation mode, address and extension numbers as
opposed to other devices for device control and the convenience of the
management. To deploy the device in the network on web Network >
Advanced > Connect Setting interface.
Parameter Set-up:
Connect Mode: It is automatically set up according to the actual device
connection with a specific server in the network such as SDMC or Cloud
and None. None is the default factory setting indicating the device is not
in any server type, therefore you are allowed to choose Cloud, SDMC in
discovery mode.
Discovery Mode: to turn on the discovery mode of the device so that it
can be discovered by other devices in the network, and disable if you
want to conceal the device so as not to be discovered by other devices.
Device Node: specify the device address by entering device location info
from the left to the right: Community, Unit, Stair, Floor, Room in sequence.
To Next Page
Loading...