Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Parameter Set-up:
Name: check to select the H264 video codec format for the door phone
video stream. H264 is the video codec by default.
Resolution: select the code resolution for the video quality among four
options:”QCIF”, “CIF”, “VGA”, “4CIF” and “720P” according to your actual
network environment. The default code resolution is 4CIF.
Bitrate: select the video stream bit rate (Ranging from 320-2048). The
greater the bitrate, the data transmitted in every second is greater in
amount therefore the video will be clearer. While the default code bitrate
is 2048.
Payload: select the payload type (ranging from 90-118) to configure
audio/video configuration file. The default payload is 104.
To Next Page
Loading...