Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Parameter Set-up:
Brightness: press on the brightness setting and move the yellow dots to
adjust the screen brightness. The default brightness is “145”.
Sleep: set the timing for the device screen to be turned off. You can
select the timing among eight options: 30 seconds, 1 minute, 2 minutes,
5 minutes, 10 minutes, 30 minutes, 1 hour. For example, if you set it as 1
minute then the screen will be turned off if there is no operation on the
device for 1 minute. However, if you turn on the function, then the device
screen will not be turned off until screen saver display reaches its
configured time duration.
Screen Saver Lock Time: set the time duration for the screen saver
among 4 options: 30 minutes, 1 hour, 2 hours, Never. for example if
select Never then the screen saver will stay permanently on.
Screen Saver: tick the square box to enable the screen saver function.
Screen Saver Type: select screen saver type among seven options: SDMC
Pictures, Local Pictures, SDMC+Local Pictures, SDMC Videos, Local
Videos, SDMC+Local Videos, Clock. Details for the screen saver types are
shown below:
Display pictures from SDMC as the screen saver.
Display picture uploaded to the indoor monitor as the
screen saver.
To Next Page
Loading...