Alcatel-Lucent 7330 - Table 1-8 Utilities Supported by ONT Interfaces

1 — ONT and MDU overview
1-18 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
The HTTP and CLI interfaces provide access to utilities that allow a field technician
to:
• retrieve product information about an ONT, such as vendor name, firmware, type
of ONT, and serial number
• retrieve operational information about an ONT, to monitor events such as the
operational states, uptime, receive signal strength indication (RSSI), status of
LEDs, and ranging state of the ONT
• monitor a software download to an ONT
• reboot or reset an ONT to recover from connection, power, software download,
and other failures
• perform OMCI and protocol tracing for problem diagnosis and resolution
• enter the SLID at an ONT, to activate ONTs with their provisioning data and
services using the SLID method, and to clear the SLID when an ONT is removed
Package C ONTs have a unique CLI that enable a field technician to retrieve and
modify the SLID and HTTP interface for viewing the current and entering a new
SLID.
The butt set allows a field technician to enter or clear the SLID at an ONT using a
POTS port.
Table 1-8 identifies with a check mark the utilities that an ONT interface supports.
Table 1-8 Utilities supported by ONT interfaces
Utilities HTTP
interface
CLI interface HTTP
interface for
Package C
ONTs
CLI interface
for Package C
ONTs
Butt set
Retrieval of ONT product
information
✓✓✓
Retrieval of ONT states ✓✓
Retrieval of ONT uptime ✓✓
Retrieval of RSSI ✓✓
Retrieval of status of LEDs ✓✓
Retrieval of ranging state ✓✓
Retrieval of software
download state
✓✓
ONT reset ✓✓✓
OMCI and protocol tracing ✓✓✓
Entry and clearing of SLID ✓✓✓✓✓