6 — ONT management using an ONT interface
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a March 2011 6-27
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
Procedures using butt set
Not applicable.
6.7 Retrieving uptime of an ONT
The uptime of an ONT is the length of time that the ONT has run without resetting.
The uptime time can be used to detect a power failure.
This section shows you how to retrieve the uptime of an ONT.
Prerequisites
The prerequisites are:
• The user access level of the ONT is read-write.
• The steps to access the interface are completed.
• See Procedure 6-1 for HTTP interface using the first Ethernet port.
• See Procedure 6-4 for CLI interface using the first Ethernet port.
Procedures using HTTP interface
The following procedure provides the steps to view the uptime of an ONT using the
HTTP interface.
Procedure 6-15 To view the uptime of an ONT
1 From the Web-Management System window, click on the States Management
tab, as shown in Figure 6-11.
Figure 6-11 Main options in the Web-Management System window
The ONT status window opens with the ONT states and their current status, as
shown in Figure 6-10.
2 Click on the Uptime tab in the window. The Uptime of ONT windows opens with
the current uptime, as shown in Figure 6-12.
To Next Page
Loading...
