Alcatel-Lucent 7330 - Figure 6-4 Secondary Menu

6 — ONT management using an ONT interface
6-8 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
Figure 6-4 Secondary menu
Option selection
To choose an option from the main or secondary menu, type the number of the option
in the menu prompt Enter choice: and press ↵. If you enter an invalid option
number, the system responds with the message Unknown option and displays the
menu again.
CLI interface for Package C ONTs
The CLI interface for Package C ONTs is menu-driven, and consists of two menus:
the login menu and SLID menu. Each menu contains a number of options from which
you can choose. To navigate to the SLID menu, you must successfully login.
Following are the login and SLID menus.
login menu
<L>ogin
E<x>it
SLID menu
Retrieve<S>lid
<M>odify Slid
<R>eboot
E<x>it
Option selection
To choose an option from the login or SLID menu, type the letter (in either uppercase
or lowercase) in the option that appears between angle brackets (<>). For example,
to modify the SLID type either M or m in response to the <M>odify Slid menu
option.
Secondary menu
===============
1. Retrieve firmware version
2. Retrieve ONT status
3. Retrieve uptime
4. Retrieve ONT type
5. Retrieve ONT serial number
6. Retrieve ONT LED status
7. Retrieve download progress
8. Reboot ONT
9. Enable tracing
10. Upload traces
11. Return to main menu
Enter choice :